SARCA No 5 ANCHOR GALV (15kg)
Item No. 103130
Loading
Anchor Size:No. 5 (15.5kg) \ Boat Length (m):9.5 - 12.5m \ Width (mm):500 \ Height (mm):360 \ Length (mm):840 \ A(mm):205 \ B(mm):225 \ C(mm):520 \ S/S Shackle Size:10mm \ Guide to MIN. Length Leader Chain:9m of 10mm \ Stocked:Order In SUPER SARCA ANCHORS SARCA anchors are designed and manufactured
Description
Anchor Size:No. 5 (15.5kg) \ Boat Length (m):9.5 - 12.5m \ Width (mm):500 \ Height (mm):360 \ Length (mm):840 \ A(mm):205 \ B(mm):225 \ C(mm):520 \ S/S Shackle Size:10mm \ Guide to MIN. Length Leader Chain:9m of 10mm \ Stocked:Order In
SUPER SARCA ANCHORS SARCA anchors are designed and manufactured in Australia using mild steel which has been hot-dip galvanised. The patented design is unique and revolutionary, offering superb holding power on a variety of bottom types including mud, sand, gravel and rock, eliminating the need to carry two or more anchors to do the same job! SARCA’s unique design makes it both safer and easier to use, the penetrating ability and holding power of the SARCA has to be experienced to be believed. FEATURES: - Hoop on the rear of the anchor ensures that the SARCA rolls over in most situations, allowing the toe to be in its best possible position to penetrate the ocean floor and reducing drag as the fluke digs in. - No more chain tangled around and between the flukes preventing the anchor from taking hold. SARCA’s unique tangle-resistant design improves anchor efficiency and safety. - Unique design also creates a pumping action which sinks the anchor deeper. Teamed with SARCA’s 360 degree pivoting action, this makes the SARCA resistant to wind and tide changes. Incorporates an automatic reset trip release that offers you the highest rate of recovery from rocks. When anchoring in and around bommies, reef and coral the SARCA has less chance of getting stuck and will cause less damage to the environment. - Light in weight, easy to handle and contains no lead in the design to contaminate the marine environment. - Certified as high holding power anchors by the Victorian Marine Board and MSA witnessed by Lloyds of London to comply with the USL code; a testament to their efficiency.
SUPER SARCA ANCHORS SARCA anchors are designed and manufactured in Australia using mild steel which has been hot-dip galvanised. The patented design is unique and revolutionary, offering superb holding power on a variety of bottom types including mud, sand, gravel and rock, eliminating the need to carry two or more anchors to do the same job! SARCA’s unique design makes it both safer and easier to use, the penetrating ability and holding power of the SARCA has to be experienced to be believed. FEATURES: - Hoop on the rear of the anchor ensures that the SARCA rolls over in most situations, allowing the toe to be in its best possible position to penetrate the ocean floor and reducing drag as the fluke digs in. - No more chain tangled around and between the flukes preventing the anchor from taking hold. SARCA’s unique tangle-resistant design improves anchor efficiency and safety. - Unique design also creates a pumping action which sinks the anchor deeper. Teamed with SARCA’s 360 degree pivoting action, this makes the SARCA resistant to wind and tide changes. Incorporates an automatic reset trip release that offers you the highest rate of recovery from rocks. When anchoring in and around bommies, reef and coral the SARCA has less chance of getting stuck and will cause less damage to the environment. - Light in weight, easy to handle and contains no lead in the design to contaminate the marine environment. - Certified as high holding power anchors by the Victorian Marine Board and MSA witnessed by Lloyds of London to comply with the USL code; a testament to their efficiency.
Specifications
- Item Category Code
- Sarca Anchors
- Recommended Retail Price
- 757.45
- catalogue page number
- 103
Reviews (0)
There are no reviews yet.
Loading
SARCA No 5 ANCHOR GALV (15kg)
Item No. 103130
Anchor Size:No. 5 (15.5kg) \ Boat Length (m):9.5 - 12.5m \ Width (mm):500 \ Height (mm):360 \ Length (mm):840 \ A(mm):205 \ B(mm):225 \ C(mm):520 \ S/S Shackle Size:10mm \ Guide to MIN. Length Leader Chain:9m of 10mm \ Stocked:Order In SUPER SARCA ANCHORS SARCA anchors are designed and manufactured
Description
Anchor Size:No. 5 (15.5kg) \ Boat Length (m):9.5 - 12.5m \ Width (mm):500 \ Height (mm):360 \ Length (mm):840 \ A(mm):205 \ B(mm):225 \ C(mm):520 \ S/S Shackle Size:10mm \ Guide to MIN. Length Leader Chain:9m of 10mm \ Stocked:Order In
SUPER SARCA ANCHORS SARCA anchors are designed and manufactured in Australia using mild steel which has been hot-dip galvanised. The patented design is unique and revolutionary, offering superb holding power on a variety of bottom types including mud, sand, gravel and rock, eliminating the need to carry two or more anchors to do the same job! SARCA’s unique design makes it both safer and easier to use, the penetrating ability and holding power of the SARCA has to be experienced to be believed. FEATURES: - Hoop on the rear of the anchor ensures that the SARCA rolls over in most situations, allowing the toe to be in its best possible position to penetrate the ocean floor and reducing drag as the fluke digs in. - No more chain tangled around and between the flukes preventing the anchor from taking hold. SARCA’s unique tangle-resistant design improves anchor efficiency and safety. - Unique design also creates a pumping action which sinks the anchor deeper. Teamed with SARCA’s 360 degree pivoting action, this makes the SARCA resistant to wind and tide changes. Incorporates an automatic reset trip release that offers you the highest rate of recovery from rocks. When anchoring in and around bommies, reef and coral the SARCA has less chance of getting stuck and will cause less damage to the environment. - Light in weight, easy to handle and contains no lead in the design to contaminate the marine environment. - Certified as high holding power anchors by the Victorian Marine Board and MSA witnessed by Lloyds of London to comply with the USL code; a testament to their efficiency.
SUPER SARCA ANCHORS SARCA anchors are designed and manufactured in Australia using mild steel which has been hot-dip galvanised. The patented design is unique and revolutionary, offering superb holding power on a variety of bottom types including mud, sand, gravel and rock, eliminating the need to carry two or more anchors to do the same job! SARCA’s unique design makes it both safer and easier to use, the penetrating ability and holding power of the SARCA has to be experienced to be believed. FEATURES: - Hoop on the rear of the anchor ensures that the SARCA rolls over in most situations, allowing the toe to be in its best possible position to penetrate the ocean floor and reducing drag as the fluke digs in. - No more chain tangled around and between the flukes preventing the anchor from taking hold. SARCA’s unique tangle-resistant design improves anchor efficiency and safety. - Unique design also creates a pumping action which sinks the anchor deeper. Teamed with SARCA’s 360 degree pivoting action, this makes the SARCA resistant to wind and tide changes. Incorporates an automatic reset trip release that offers you the highest rate of recovery from rocks. When anchoring in and around bommies, reef and coral the SARCA has less chance of getting stuck and will cause less damage to the environment. - Light in weight, easy to handle and contains no lead in the design to contaminate the marine environment. - Certified as high holding power anchors by the Victorian Marine Board and MSA witnessed by Lloyds of London to comply with the USL code; a testament to their efficiency.
Specifications
- Item Category Code
- Sarca Anchors
- Recommended Retail Price
- 757.45
- catalogue page number
- 103
Reviews (0)
There are no reviews yet.